Forwarding Calls to Voice Mail
You can use the codes below to forward to voice mail on any phone.
This is the simple version. For more detailed instructions, Please see below.
Forwarding Your Phone to Voice Mail – Simple Version
- Then "INTERCOM" *7105500#
- Lift handset to exit programming mode and you're done
Detailed Version to Forward Your Phones to Voice Mail
NOTE: The code 500 below is what we typically program for the voice mail extension. Yours (on rare occasions) may be different. If it is, substitute your voice mail extension for the 500 listed in the codes below.
TRANSFER OFF-SITE: To transfer to another location or your cell phone, use the code below, instead of 500 pound, press 9, the number you want to transfer to and pound. MUST BE PREVIOUSLY ALLOWED IN SYSTEM PROGRAMMING.
TO CANCEL FORWARDING: Press INTERCOM STAR 7100
Both Outside & Inside Calls
| 1 | Forward All | INTERCOM STAR 7102 500 POUND |
| 2 | Forward BUSY | INTERCOM STAR 7103 500 POUND |
| 3 | Forward N/A | INTERCOM STAR 7104 500 POUND |
| 4 | Forward B N/A | INTERCOM STAR 7105 500 POUND |
Outside Calls Only
| 5 | Forward All | INTERCOM STAR 7112 500 POUND |
| 6 | Forward BUSY | INTERCOM STAR 7113 500 POUND |
| 7 | Forward N/A | INTERCOM STAR 7114 500 POUND |
| 8 | Forward B N/A | INTERCOM STAR 7115 500 POUND |
Inside Calls Only
| 9 | Forward All | INTERCOM STAR 7122 500 POUND |
| 10 | Forward BUSY | INTERCOM STAR 7123 500 POUND |
| 11 | Forward N/A | INTERCOM STAR 7124 500 POUND |
| 12 | Forward B N/A | INTERCOM STAR 7125 500 POUND |
Number 4 is the most popular. It forwards to voice mail is the voice mail for both inside and outside calls
either if you are on the phone or you do not answer the phone. Use number 3 if when you are on the
phone, you want to know when someone is trying to get through to you either inside or outside.
FORWARD INSTRUCTIONS ON 7600 SERIES DISPLAY PHONES ONLY
(or you can use the codes listed above)
| Forward All (Both outside & inside calls) | Forward B/NA (Only outside line calls) | Forward only inside extension calls |
| Press PROGDial 50, Press ENTER Press SEL until the display says B/NA Dial 500, Press ENTER, Press EXIT | Press PROG Dial 51, Press ENTER Press SEL until the display says B/NA Dial 500, Press ENTER, Press EXIT | Press PROGDial 52, Press ENTER Press SEL until the display says B/NA Dial 500, Press ENTER |
| In this mode, both CO line and extension calls forward to the desired location. It could be another station or the voice mail system. If set to Do Not Disturb (DND) all calls will get a busy signal. | In this mode, CO line calls are forwarded to the desired location. It could be another station or the voice mail system. If set to Do Not Disturb (DND) all CO line calls will get a busy signal. Extension calls will follow Program 52 directions | In this mode, extension calls are forwarded to the desired location. It could be another station or the voice mail system. If set to Do Not Disturb (DND) all extension calls will get a busy signal. CO Line calls will follow Program 51 directions |
NOTE: The 500 above is what we use for the voice mail extension. Yours may be different. If it is, substitute your voice mail extension for the 500 listed in the steps above.
TO CANCEL FORWARDING: INTERCOM STAR 7100